01-01-2010 06:17 PM
I cannot get my computers to see a homegroup. I have tried creating the homegroup on each computer and the other one always says there is no homegroup on the network. Both computers are running Norton 360 v22.214.171.124. One computer is running Windows 7 Ultimate and the other is running Windows 7 RC.
Any help would be appreciated.
Solved! Go to Solution.
01-01-2010 08:16 PM
Just to clarify, did you build the home group in Windows, according to the instructions?
When you open N360, is the name of your home group displayed in the box under network details?
Are there any devices showing in the network map?
Did you set "Computer discovery" to on?
01-02-2010 05:20 AM
01-02-2010 11:16 AM
I don't think there is anything that specifically says "Home Group" in Norton. There should be a box with a menu on the left hand side of the network map screen that has the actual name of the network connection, whatever you called it when you set it up, and "Trust control." If you can see all off the machines in the network map, click on the network details>trust control>and set the level of trust for each machine.
I think you are confusing the home group with the network. What you are viewing in Norton, is the home network, which should document all of the connections for the machines in the home group, as well as visitors who may be allowed to connect. If you can see all of the machines in the network map, you have done it correctly.
Keep in mind that both machines require their own antivirus and firewall.
01-02-2010 12:04 PM
01-02-2010 12:21 PM
01-02-2010 01:50 PM
01-02-2010 03:11 PM
02-17-2010 10:17 AM
I have this exact same problem but I do not get the same results following the advice above. Even more importantly once I remove Norton from one PC the other can see it in Homegroup so it is Norton that is blocking Homegroup access when it was installed. When I remove Norton on the second PC then all is fine and I can see and use Homegroup on both computers. I think the problem (based on the comments) Norton does not have a clue as to what Homegroup in Windows 7 is or does. (The comment from delphinium Super Worm Eliminator was about confusing Homegroup with Network.)
My solution? Bought McAfee and everything works fine so I am just considering the cost of both Norton 2010 and Norton 360 a very bad investment and I will steer clear from anything that Norton produces.
Incidentally I have had their technicians all over my two PC's and they do not seem to have a clue other than to blame another companies product!
02-17-2010 08:08 PM
I also have a home group with two computers, NIS2010 on both. I had a bit of trouble adding my son't computer to the home network, mainly because I bunged up the settings myself. Once I built a new home group under a different name, properly, all of the computers were visible and connected. That was accomplished with NIS in place on both home machines and AVG on the laptop.
It can take a bit of fiddling sometimes because connections have to go through at least two firewalls on each machine to work reliably.