Hello,
Does anyone know how to change firewall settings for the following:
"In order to get this working through your firewall and /or the Network Address Translation (NAT) device, you will need to ensure that the following traffic be allowed through the following ports to the corresponding (IP) addresses:
______________________________________________
TCP transport mode:
Port: 10000 (Outbound)
UDP transport mode (with NAT device):
Port: 500 & 4500 (Outbound)
UDP transport mode (with no NAT device):
Port: 500 & 10000 (Outbound)
______________________________________________
VPN concentrators (TCP or UDP mode):
Mel/Ade (IP): 203.202.40.129
Mel/Ade (IP): 180.149.192.196
Syd/Bri (IP): 61.88.100.161
______________________________________________
Telnet (client and Server):
Port: 7586
Telnet to the CEG servers:
Melbourne (IP): 203.202.43.1
Adelaide (IP): 203.202.43.2
Brisbane (IP): 203.202.43.3
Sydney (IP): 203.202.43.4
______________________________________________
If you connect via the ISyd/Bri concentrator you will not be able to access the Melbourne (203.202.43.1) or Adelaide (203.202.43.2) telnet sites and similarly, if you connect to the IMel/Ade concentrator you will not have access to Brisbane (203.202.43.3) or Sydney (203.202.43.4)."
My knowledge on Norton, Firewalls etc is low.
Thanks
Pallot